Drill Mud Sump in Fort McMurray, Alberta

ケーススタディ

チャレンジ

Large volume of oil and gas exploration drilling fluid stored in drill mud sump to be solidified in severe cold in Fort McMurray, AB in January. Long distance to liquids disposal site made liquid transport and disposal costs extremely high. After treatment, the solidified waste drill fluids were transported to a solids disposal site saving approximately 8 hours per load.

ソリューション

Large volumes and other logistical issues necessitated MetaFLO’s reagents to be mechanically mixed with the waste drill mud. Mixing was completed by an excavator in the storage sump. MetaFLO’s reagents perform well in extreme cold and achieved the required paint filter solids criteria on this project.

結果

Competing reagents were treated concurrently on another site for comparison by the owner. While the competing process was rejected at the landfill, MetaFLO’s treated solids met the same landfill’s requirements and were accepted.

カボンヌ・シャイアWWTラグーン

主要ステークホルダー

オーナー ヴァーレ・カナダ・リミテッド
請負業者: テルヴィータ社
配給会社: ディ・コープ

ヴァレ・テルヴィータ・ディ・コープ

チャレンジ

ヴァーレ社は、カナダのオンタリオ州北部で採掘場を所有・操業している。採掘と精錬活動を通じて、副産物として汚泥が発生する。顧客は、このスラッジをオフサイトの埋立地まで運搬するための効率的な掘削・運搬ソリューションを必要としていた。

日付

2018年9月末~2018年10月中旬

ソリューション

入札の過程で、MetaFLOは汚泥の掘削と輸送に必要な固形分基準を達成するための最適な配合と添加率を提供するために契約した。分析データを用いて、MetaFLOは重量で1.1%の添加率を見積もった(高含水率に基づく)。バケット混合プロセスでの表面接触と効率を高めるため、大型混合ビンを推奨した。この時点ではサンプルは入手できなかった。

結果

Tervita Corporationは、約4,000m3の汚泥を固化するためにMetaFLO試薬を使用した。現場には35m3のビンが2つ設置され、「重い」スラッジと「軽い」スラッジが混在して投入された。実際の処理では、汚泥1m3あたり平均約30ポンドのMetaFLO MF006試薬が投入されたため、当初見積もられた投入量は正確であった。すべての材料はValeのオフサイト埋立地に安全に輸送された。作業は予定通りに完了した。