매립지 침출수 웨스트버지니아주

사례 연구

도전 과제

Our client was receiving fluid from frac operations for disposal directly into their landfill. The fluid had very low solids content <15%. The previous solidification method was to dump the fluid into a pit and mixing fly ash at a 2:1 ratio. The bulked up waste was then moved into a landfill cell for final disposition. The water catchment system was overloaded due to the ineffective solidification method and was destabilizing the landfill with water volume.

솔루션

MetaFLO mobilized to site with our LMS 3 high shear mixing unit and flocculent. The vacuum truck offloaded the frac water waste into a recessed container. This fluid was then pumped through the LMS 3 to deliver our flocculent to the waste stream phase separating water from the solids at a .0015 wt/wt addition rate of a clay based MetaFLO flocculent.

결과

After treatment, the client received excellent water clarity / low turbidity in the separated brine water. The treated water was then pumped into a 20,000 gallon tank to be returned to the drillers for beneficial reuse. A small amount (<3%) of brine tolerant reagent was added to the separated semi-solids to fully solidify this phase for disposal in landfill as a firm, earth-like material.

시약

카본 샤이어 WWT 라군

주요 이해관계자:

소유자: Vale Canada Ltd.
계약자: Tervita Corp.
배포자: Di-Corp

발레-테르비타-디-코프

도전 과제

Vale는 캐나다 온타리오주 북부에 광산을 소유하고 운영하고 있습니다. 채굴 및 정제 활동을 통해 슬러지 폐기물 부산물이 발생합니다. 고객은 이 슬러지를 외부 매립지로 옮기기 위해 효율적인 굴착 및 운송 솔루션이 필요했습니다.

날짜

2018년 9월 말 - 2018년 10월 중순

솔루션

입찰 과정에서 MetaFLO는 슬러지의 굴착 및 운송에 필요한 고형물 기준을 달성하기 위한 최적의 혼합 및 투입 비율을 제공하기 위해 참여했습니다. 메타플로에서는 분석 데이터를 사용하여 중량당 1.1%의 투입 비율을 추정했습니다(높은 수분 함량 기준). 버킷 혼합 과정에서 표면 접촉과 효율을 높이기 위해 대형 혼합 통을 사용하는 것이 좋습니다. 현재 샘플을 사용할 수 없습니다.

결과

테르비타 코퍼레이션은 메타플로 시약을 사용하여 약 4,000㎥의 슬러지를 응고시켰습니다. 현장에 35m3 용량의 쓰레기통 2개를 설치하여 "무거운" 슬러지와 "가벼운" 슬러지를 혼합하여 적재했습니다. 실제 처리 시 슬러지 1㎥당 평균 약 30파운드의 MetaFLO MF006 시약이 사용되었기 때문에 원래 예상했던 투여량은 정확했습니다. 모든 물질은 Vale의 오프사이트 매립지로 안전하게 운송되었습니다. 작업은 제시간에 완료되었습니다.