ميتافلو تكنولوجيز · كواشف التصلب

Dark MF006

MF006 - Solidification Reagent for Liquid and Semi-Solid Waste Streams

Environmentally safe solidification reagent designed to simplify the handling, transportation, and disposal of water-based semi-solid waste streams and liquid residual waste. MF006 rapidly converts high-moisture waste into stackable material while reducing free-liquid release during handling and disposal operations.

ناقش مشروعك
شاهد كيف يعمل

بمصطلحات بسيطة

م ف 006 is a solidification reagent developed by MetaFLO Technologies and applied directly into liquid waste and water-based semi-solid waste streams to convert them into stackable material for easier handling, transportation, and disposal.

The technology is designed for liquid residual waste, sludge, slurry, spoils, and water-based semi-solid materials that require rapid solidification and improved operational handling.

Up to 10min

Rapid waste solidification

ما يصل إلى 67%

خفض تكاليف لوجستيات التخلص

0.2-1.0%

معدلات الجرعات النموذجية

What is MF006?

MF006 is a yellow granular solidification reagent developed for the rapid treatment of liquid waste and water-based semi-solid waste streams, transforming high-moisture material into stackable solids for easier handling, transportation, and disposal.

MF006 is a non-hazardous, landfill-friendly, and chemically inert solution that helps reduce free-liquid release and supports compliance with Paint Filter Test (PFT) requirements for waste handling and disposal operations.

The reagent is designed for liquid residual waste, sludge, slurry, spoils, and water-based semi-solid materials that require rapid solidification and operational waste management.

What problems does MF006 solve?

MF006 helps manage difficult liquid waste and water-based semi-solid waste streams that are challenging to handle, transport, stockpile, and dispose of due to excess moisture and unstable consistency.

Traditional disposal methods such as drying pits, natural evaporation, lime, sawdust, cement, and mechanical dewatering systems may increase waste mass, require additional operational space, delay disposal activities, and complicate logistics management.

Untreated Microtunneling Spoils MF006

MF006 rapidly transforms unstable waste streams into stackable material for easier handling, transportation, and disposal while helping reduce free-liquid release during operational handling.

Under favorable drying conditions, the treated material may continue losing moisture through natural evaporation, helping reduce waste weight and disposal logistics costs over time.

solidification microtunneling spoils MF006

How does MF006 work?

With typical dosage rates ranging from 0.2–1.0%, MF006 is applied directly onto liquid waste and water-based semi-solid material and mechanically mixed using excavators or similar equipment.

The reagent allows rapid solidification, transforming sludge, slurry, spoils, liquid residue, and water-based semi-solid waste into stackable material for easier handling, transportation, and disposal operations.

MF006 supports ongoing evaporation after treatment and may help reduce waste weight over time under favorable dry conditions.

Because the material may rehydrate when exposed to rainfall or excessive moisture, treated waste should be protected whenever possible to help maintain its solidified condition.

How does MF006 compare?

معايير Lime (quicklime /
الجير المطفأ		 أسمنت نشارة الخشب ميكانيكي
تجفيف
أجهزة الطرد المركزي		 طبيعي
تجفيف		 أكياس جيوبغ م ف 006
جرعات ~جرعة 5.0% ~10.0% ~30.0% الجرعة — — — 0.2-1.0% dosage
سهولة المناولة أو الخلط منخفض منخفض مرتفع متوسط متوسط متوسط مرتفع
Response speed until free-liquid release is reduced حوالي 24 ساعة 24 ساعة 24 ساعة يعتمد على جهاز الطرد المركزي أسابيع أسابيع <10 min
اكتساب القوة البدنية محدود مرتفع لا شيء لا شيء لا شيء لا شيء ليس الهدف
الاستقرار الكيميائي مع مرور الوقت Can release liquids متغير منخفض — — — Chemically inert
تفاعل طارد للحرارة نعم قد يحدث لا لا — — لا ينشئ
تقليل تكلفة النقل متوسط منخفض منخفض متوسط متوسط متوسط انخفاض يصل إلى 67%
تخفيض تكلفة التخلص متوسط منخفض منخفض متوسط متوسط متوسط انخفاض بنحو 30%
Classification as solid (stackable material with reduced free-liquid release) ليس دائماً ليس دائماً ليس دائماً ليس دائماً لا ليس دائماً تجاوز اختبار فلتر الطلاء (EPA 9095)
مخاطر بيئية متوسط / عالٍ متوسط / عالٍ متوسط متوسط مرتفع متوسط منخفض

How to Apply MF006

تحليل النفايات

Evaluate the waste density, moisture content, and handling requirements to determine the appropriate MF006 dosage. Typical application rates generally range from 0.2–1.0%.

2. Apply MF006 directly onto the waste material

Spread the reagent directly over sludge, slurry, spoils, liquid residue, or water-based semi-solid waste streams in pits, tanks, ponds, stockpiles, containers, or staging areas.

3. اخلط المادة ميكانيكيًا

Mix using excavators or similar equipment to ensure uniform distribution and full contact between MF006 and the waste material.

4. السماح بالتصلب

MF006 allows rapid solidification, transforming the waste into stackable material in as little as 10 minutes.

5. النقل، التخزين، أو التخلص

Once solidified, the material can be handled using standard equipment for transportation, temporary stockpiling, or disposal operations.

Where MF006 is Used

MF006 is designed for liquid waste and water-based semi-solid waste streams requiring rapid solidification
and improved handling during transportation and disposal operations.

Sludge and slurry management

Helps solidify wet sludge and slurry materials to improve handling, transportation, stockpiling, and disposal operations.

Drilling waste and wet spoils

Rapidly transforms high-moisture drilling waste and wet spoils into stackable material for easier handling and disposal.

Hydro excavation waste

Helps manage hydro excavation waste and slurry by reducing free-liquid release and improving operational handling conditions.

Tunnelling spoils and slurry

Supports the handling and disposal of wet spoils and slurry generated during excavation and tunnelling activities.

Liquid residual waste

Helps solidify liquid residual waste into stackable material for easier transportation and disposal management.

Water-based semi-solid waste streams

Designed for difficult high-moisture waste streams that require rapid solidification and operational waste management support.

MF006 in the field

Wastewater Sludge

Cabonne Shire Project

MF006 rapidly solidified wastewater sludge into stackable material for easier transport, disposal, and waste stream management while helping the project stay on time and under budget.

اعرف المزيد...

الحفر الهيدروليكي

Hydro Excavation Project

MF006 transformed hydro excavation slurry into stackable material suitable for easier handling, transportation, and disposal management.

اعرف المزيد...

Tunnelling Waste

Toronto Crosstown Subway

MF006 rapidly solidified tunnelling slurry and wet spoils into stackable material, helping reduce transportation requirements by up to 54% while simplifying tunnelling waste management and disposal logistics.

اعرف المزيد...

مراجع التخلص والامتثال

MF006 is designed to help reduce free-liquid release and support compliance with Paint Filter Test (PFT)
requirements for waste handling and landfill disposal operations. Final disposal pathways and waste classification should always
follow local regulations, landfill requirements, and project-specific environmental guidelines.

EPA Paint Filter Test
(Method 9095B)

تستخدم وكالة حماية البيئة الأمريكية (EPA) اختبار مرشح الطلاء للسوائل (الطريقة 9095B) لتحديد وجود سوائل حرة في النفايات لأغراض التخلص منها في مدافن النفايات وتصنيفها. تعتبر المواد التي تطلق سوائل حرة أثناء الاختبار نفايات سائلة.

طريقة اختبار وكالة حماية البيئة
9095B فلتر دهان اختبار السوائل

معايير التقييم الشائعة:

  • غياب السوائل الحرة
  • Stackable material with reduced free-liquid release
  • ملاءمة الطمر

Landfill disposal and free-liquid restrictions

تفرض العديد من لوائح مدافن النفايات في أمريكا الشمالية قيودًا أو تحظر دفن النفايات التي تحتوي على سوائل حرة. غالبًا ما يتم الاستشهاد بمعايير اختبار مرشح الطلاء لتقييم قبول النفايات لدفنها ونقلها.

الأهداف التشغيلية النموذجية

  • تقليل السوائل الحرة
  • قابلية تكديس محسنة
  • Reduced free-liquid release
  • خفض تكاليف النقل
  • مادة صلبة قابلة للدفن في مكبات النفايات

Industrial liquid waste
handling

Drilling mud, slurry, sludge, and wet industrial residues may be classified as liquid industrial waste depending on their composition and free-liquid content. Solidification technologies are commonly used to simplify handling, transportation, and disposal logistics.

مصادر التشغيل المشتركة

  • HDD drilling fluids
  • TBM and EPB slurry
  • حمأة الصرف الصحي
  • رواسب مياه الأمطار
  • Industrial sludge and spoils materials

الملف البيئي

Non-hazardous formulation

MF006 is a non-hazardous, landfill-friendly, and chemically inert solidification reagent designed for liquid waste and water-based semi-solid waste management applications.

التوافق التشغيلي

  • Compatible with standard mixing equipment
  • Supports stackable material generation
  • Applied directly onto wet waste material
  • Helps simplify transportation and disposal logistics
  • لا يلزم وجود بنية تحتية متخصصة للتصلب

أسئلة متكررة

What is MF006 used for?

How fast does MF006 solidify waste?

What types of waste can MF006 treat?

How is MF006 applied?

Does MF006 help reduce disposal costs?

Can MF006 help pass Paint Filter Test (PFT) requirements?

Can MF006 be used in HDD and drilling operations?

Is MF006 environmentally safe?

Can MF006 be used for sludge solidification?

Explore related solutions

م ف 003

High-performance solidification reagent optimized for challenging liquid waste streams and high-slump sludge.

Learn more

Explore all reagents

View our complete line of environmentally friendly solidification and stabilization solutions.

Learn more

دعنا نتحدث عن مشروعك

أخبرنا بظروف تربتك ومتطلبات الموقع. سنوصي بالعلاج المناسب، ونتولى إجراء الاختبارات المعملية، وندعم تطبيقك الأول.

اتصل بـ MetaFLO