MetaFLO Technologies  ·  Solidification Reagents

Dark MF006

Reagent for solidification of waste and sludge, by MetaFLO Technologies.

Environmentally safe solidification reagent designed to simplify the handling, transportation, and disposal of water-based semi-solid waste streams and liquid residual waste. MF006 rapidly converts high-moisture waste into stackable material while reducing free-liquid release during handling and disposal operations.

Discuss your project
See how it works

In plain terms

MF006 is a solidification reagent developed by MetaFLO Technologies and applied directly into liquid waste and water-based semi-solid waste streams to convert them into stackable material for easier handling, transportation, and disposal.

The technology is designed for liquid residual waste, sludge, slurry, spoil, and water-based semi-solid materials that require rapid solidification and improved operational handling.

Up to 10min

Rapid waste solidification

Up to 67%

Lower disposal logistics costs

0.2-1.0%

Typical dosage rates

What is MF006?

MF006 is a yellow granular solidification reagent developed for the rapid treatment of liquid waste and water-based semi-solid waste streams, transforming high-moisture material into stackable solids for easier handling, transportation, and disposal.

MF006 is a non-hazardous, landfill-friendly, and chemically inert solution that helps reduce free-liquid release and supports compliance with Paint Filter Test (PFT) requirements for waste handling and disposal operations.

The reagent is designed for liquid residual waste, sludge, slurry, spoil, and water-based semi-solid materials that require rapid solidification and operational waste management.

What problems does MF006 solve?

MF006 helps manage difficult liquid waste and water-based semi-solid waste streams that are challenging to handle, transport, stockpile, and dispose of due to excess moisture and unstable consistency.

Traditional disposal methods such as drying pits, natural evaporation, lime, sawdust, cement, and mechanical dewatering systems may increase waste mass, require additional operational space, delay disposal activities, and complicate logistics management.

Untreated Microtunneling Spoils MF006

MF006 rapidly transforms unstable waste streams into stackable material for easier handling, transportation, and disposal while helping reduce free-liquid release during operational handling.

Under favorable drying conditions, the treated material may continue losing moisture through natural evaporation, helping reduce waste weight and disposal logistics costs over time.

solidification microtunneling spoils MF006

How does MF006 work?

With typical dosage rates ranging from 0.2–1.0%, MF006 is applied directly onto liquid waste and water-based semi-solid material and mechanically mixed using excavators or similar equipment.

The reagent allows rapid solidification, transforming sludge, slurry, spoil, liquid residue, and water-based semi-solid waste into stackable material for easier handling, transportation, and disposal operations.

MF006 supports ongoing evaporation after treatment and may help reduce waste weight over time under favorable dry conditions.

Because the material may rehydrate when exposed to rainfall or excessive moisture, treated waste should be protected whenever possible to help maintain its solidified condition.

How does MF006 compare?

Criteria Lime (quicklime /
hydrated lime)		 Il cemento Segatura Mechanical
drying
(centrifuges)		 Natural
drying		 Geobags MF006
Dosages ~5.0% dosage ~10.0% ~30.0% dosage — — — 0.2-1.0% dosage
Ease of handling or mixing Low Low High Medium Medium Medium High
Response speed until free-liquid release is reduced ~24 h >24 h >24 h Depends on centrifuge Weeks Weeks <10 min
Physical strength gain Limited High None None None None Not the objective
Chemical stability over time Can release liquids Variable Low — — — Chemically inert
Exothermic reaction Yes May occur No No — — Does not generate
Transportation cost reduction Medium Low Low Medium Medium Medium Up to 67% reduction
Disposal cost reduction Medium Low Low Medium Medium Medium Around 30% reduction
Classification as solid (stackable material with reduced free-liquid release) Not always Not always Not always Not always No Not always Meets Paint Filter Test (EPA 9095)
Environmental risk Medium / High Medium / High Medium Medium High Medium Low

How to Apply MF006

1. Analyze the waste material

Evaluate the waste density, moisture content, and handling requirements to determine the appropriate MF006 dosage. Typical application rates generally range from 0.2–1.0%.

2. Apply MF006 directly onto the waste material

Spread the reagent directly over sludge, slurry, spoil, liquid residue, or water-based semi-solid waste streams in pits, tanks, ponds, stockpiles, containers, or staging areas.

3. Mechanically mix the material

Mix using excavators or similar equipment to ensure uniform distribution and full contact between MF006 and the waste material.

4. Allow solidification

MF006 allows rapid solidification, transforming the waste into stackable material in as little as 10 minutes.

5. Transport, stockpile, or dispose

Once solidified, the material can be handled using standard equipment for transportation, temporary stockpiling, or disposal operations.

Where MF006 is Used

MF006 is designed for liquid waste and water-based semi-solid waste streams requiring rapid solidification
and improved handling during transportation and disposal operations.

Sludge and slurry management

Helps solidify wet sludge and slurry materials to improve handling, transportation, stockpiling, and disposal operations.

Drilling waste and wet spoil

Rapidly transforms high-moisture drilling waste and wet spoil into stackable material for easier handling and disposal.

Hydro excavation waste

Helps manage hydro excavation waste and slurry by reducing free-liquid release and improving operational handling conditions.

Tunnelling spoil and slurry

Supports the handling and disposal of wet spoil and slurry generated during excavation and tunnelling activities.

Liquid residual waste

Helps solidify liquid residual waste into stackable material for easier transportation and disposal management.

Water-based semi-solid waste streams

Designed for difficult high-moisture waste streams that require rapid solidification and operational waste management support.

MF006 in the field

Wastewater Sludge

Cabonne Shire Project

MF006 rapidly solidified wastewater sludge into stackable material for easier transport, disposal, and waste stream management while helping the project stay on time and under budget.

Learn More...

Idroscavatore

Hydro Excavation Project

MF006 transformed hydro excavation slurry into stackable material suitable for easier handling, transportation, and disposal management.

Learn More...

Tunnelling Waste

Toronto Crosstown Subway

MF006 rapidly solidified tunnelling slurry and wet spoil into stackable material, helping reduce transportation requirements by up to 54% while simplifying tunnelling waste management and disposal logistics.

Learn More...

Disposal and compliance references

MF006 is designed to help reduce free-liquid release and support compliance with Paint Filter Test (PFT)
requirements for waste handling and landfill disposal operations. Final disposal pathways and waste classification should always
follow local regulations, landfill requirements, and project-specific environmental guidelines.

EPA Paint Filter Test
(Method 9095B)

The United States Environmental Protection Agency (EPA) uses the Paint Filter Liquids Test (Method 9095B) to determine the presence of free liquids in waste materials for landfill disposal and waste classification purposes. Materials that release free liquid during the test are considered liquid waste.

EPA Test Method:
9095B Paint Filter Liquids Test

Common evaluation criteria:

  • Absence of free liquids
  • Stackable material with reduced free-liquid release
  • Landfill disposal suitability

Landfill disposal and free-liquid restrictions

Many North American landfill regulations restrict or prohibit the disposal of waste containing free liquids. Paint Filter Test criteria are commonly referenced to evaluate waste acceptance for landfill disposal and transportation.

Typical operational objectives:

  • Reduction of free liquids
  • Improved stackability
  • Reduced free-liquid release
  • Lower transportation costs
  • Landfill-compatible solid material

Industrial liquid waste
handling

Drilling mud, slurry, sludge, and wet industrial residues may be classified as liquid industrial waste depending on their composition and free-liquid content. Solidification technologies are commonly used to simplify handling, transportation, and disposal logistics.

Common operational sources:

  • HDD drilling fluids
  • TBM and EPB slurry
  • Wastewater sludge
  • Stormwater sediments
  • Industrial sludge and spoil materials

Environmental profile

Non-hazardous formulation

MF006 is a non-hazardous, landfill-friendly, and chemically inert solidification reagent designed for liquid waste and water-based semi-solid waste management applications.

Operational compatibility:

  • Compatible with standard mixing equipment
  • Supports stackable material generation
  • Applied directly onto wet waste material
  • Helps simplify transportation and disposal logistics
  • No specialized solidification infrastructure required

Common questions

What is MF006 used for?

How fast does MF006 solidify waste?

What types of waste can MF006 treat?

How is MF006 applied?

Does MF006 help reduce disposal costs?

Can MF006 help pass Paint Filter Test (PFT) requirements?

Can MF006 be used in HDD and drilling operations?

Is MF006 environmentally safe?

Can MF006 be used for sludge solidification?

Explore related solutions

MF003

High-performance solidification reagent optimized for challenging liquid waste streams and high-slump sludge.

Learn more

Explore all reagents

View our complete line of environmentally friendly solidification and stabilization solutions.

Learn more

Let's talk about your project

Tell us your soil conditions and site requirements. We'll recommend the right treatment, arrange lab testing, and support your first application.

Contact MetaFLO