액체 폐기물은 많은 산업 프로젝트의 필수 부산물입니다... 값비싼 운송 및 폐기가 필요하지 않습니다!

What Are MetaFLO’s Reagents?

메타플로 시약은 액체 폐기물을 실시간으로 쌓을 수 있는 고체로 바꾸면서 1%의 액체 폐기물 부피의 1/2만 추가하면 됩니다. 독점 시약 화학 물질인 MetaFLO 시약은 포틀랜드 시멘트, 톱밥, 석회, 플라이 애쉬 등과 같은 일반적이고 비용이 많이 드는 많은 대체재의 필요성을 대체하여 액체 폐기물 흐름을 쉽고 빠르고 환경 친화적으로 관리할 수 있는 방법을 제공합니다.

MetaFLO’s reagents are:

FAST – It immediately converts liquid waste to a solid in minutes.

EASY – It creates a dry, stackable solid for easy handling.

ENVIRONMENTALLY FRIENDLY – It helps waste pass Toxicity Characteristics Leaching Procedure (EPA Method 1311) and paint filter criteria (EPA 9095). Landfill friendly and does not biodegrade.

FLEXIBLE – It can be used for various applications.

PRODUCE LESS WASTE – It produces a fraction of the waste compared to common alternatives such as using dry bulking agents like sawdust.

 

Where: Applications/Industries

MetaFLO’s solidification reagents are ideal for industries like drilling, tunneling, hydro excavation and other applications that generate liquid waste.

수평 방향 드릴링

Disposal of liquid drilling slurry can be costly and negatively impact the environment if not managed properly. MetaFLO’s technology can solidify the liquid waste on-site, which then allows the solidified waste to be transferred in dump trucks directly to the final disposal site.

수력 굴착

Hydro excavation generates liquid slurry that’s typically dumped at various receiving sites to dry. MetaFLO’s technology will allow receiving sites to solidify the slurry within minutes of receiving the material, which means the footprint of the receiving sites can be significantly reduced and the overall operating cost will be drastically lower. After solidification, the soil-like material can be loaded into dump trucks and transported to the final disposal site.

Tunneling & Microtunneling

Depending on ground conditions, the soil removed from tunnels can be quite liquid. Spoils solidification with environmentally friendly polymers from MetaFLO Technologies provide an innovative and effective method to efficiently dry the wet spoils.

환경

Depending on the type of liquid that you are dealing with, turning the liquid into solid can have various advantages, such as, easier to handle, cheaper and safer to transport, and better management of material. As a solid, the material may also be used for other purposes, such as clean fill material or agricultural land applications.

Storm Water Ponds

Sediment that has filled in the stormwater pond over time has a flowable and sludge-like consistency. This sediment can be treated with very low dosages of polymer-based solidification reagent to change the consistency of the sediment into a more soil-like texture.